Hydraulic Properties Card Syntax
~Hydraulic Properties Card
Choose One Hydraulic Property OptionIntrinsic Permeability
Choose One Porosity/Permeability ModelMatrix Only
Repeat for each Rock/Soil Zonation Domain
,
X-Direction Intrinsic Permeability,
Units,
(m^2),
Y-Direction Intrinsic Permeability,
Units,(m^2),
Z-Direction Intrinsic Permeability,
Units,(m^2),
IJK IndexingIf the Rock/Soil Name is "IJK Indexing," "JKI Indexing," or "KIJ Indexing" the value specified will be applied to all nodes in the domain. Alternately, any parameter value can be replaced with an external file using the following syntax in the place of the parameter value:
,file:,filename for parameter,
or for binary files:
,binary file:,filename for parameter,
Units shown in the input line will be applied to all parameters in the external file. Values and files may be used in combination within an input line.
Matrix Only with Permeability Reduction
Repeat for each Rock/Soil Zonation Domain,
X-Direction Intrinsic Permeability,
Units,(m^2),
Y-Direction Intrinsic Permeability,
Units,(m^2),
Z-Direction Intrinsic Permeability,
Units,(m^2),
Pore-body Fractional Length,
Fractional Critical Porosity,
IJK IndexingIf the Rock/Soil Name is "IJK Indexing," "JKI Indexing," or "KIJ Indexing" the value specified will be applied to all nodes in the domain. Alternately, any parameter value can be replaced with an external file using the following syntax in the place of the parameter value:
,file:,filename for parameter,
or for binary files:
,binary file:,filename for parameter,
Units shown in the input line will be applied to all parameters in the external file. Values and files may be used in combination within an input line.
Dual Continuum for Fractured Systems
InfoIf the key words 'dp,' 'dual porosity,' or 'fractured' appear in the rock/soil name specified in the Rock/Soil Zonation Card, this indicates a dual porosity medium and the reading of both matrix and fracture properties (e.g., Fracture and Matrix Porosity) is triggered.
Repeat for each Rock/Soil Zonation Domain,
X-Direction Matrix Intrinsic Permeability,
Units,(m^2),
Y-Direction Matrix Intrinsic Permeability,
Units,(m^2),
Z-Direction Matrix Intrinsic Permeability,
Units,(m^2),
X-Direction Fracture Intrinsic Permeability,
Units,(m^2),
Y-Direction Fracture Intrinsic Permeability,
Units,(m^2),
Z-Direction Fracture Intrinsic Permeability,
Units,(m^2),
IJK IndexingIf the Rock/Soil Name is "IJK Indexing," "JKI Indexing," or "KIJ Indexing" the value specified will be applied to all nodes in the domain. Alternately, any parameter value can be replaced with an external file using the following syntax in the place of the parameter value:
,file:,filename for parameter,
or for binary files:
,binary file:,filename for parameter,
Units shown in the input line will be applied to all parameters in the external file. Values and files may be used in combination within an input line.
Dual Continuum for Fractured Systems with Permeability Reduction
InfoIf the key words 'dp,' 'dual porosity,' or 'fractured' appear in the rock/soil name specified in the Rock/Soil Zonation Card, this indicates a dual porosity medium and the reading of both matrix and fracture properties (e.g., Fracture and Matrix Porosity) is triggered.
Repeat for each Rock/Soil Zonation Domain,
X-Direction Matrix Intrinsic Permeability,
Units,(m^2),
Y-Direction Matrix Intrinsic Permeability,
Units,(m^2),
Z-Direction Matrix Intrinsic Permeability,
Units,(m^2),
X-Direction Fracture Intrinsic Permeability,
Units,(m^2),
Y-Direction Fracture Intrinsic Permeability,
Units,(m^2),
Z-Direction Fracture Intrinsic Permeability,
Units,(m^2),
Pore-body Fractional Length,
Fractional Critical Porosity,
IJK IndexingIf the Rock/Soil Name is "IJK Indexing," "JKI Indexing," or "KIJ Indexing" the value specified will be applied to all nodes in the domain. Alternately, any parameter value can be replaced with an external file using the following syntax in the place of the parameter value:
,file:,filename for parameter,
or for binary files:
,binary file:,filename for parameter,
Units shown in the input line will be applied to all parameters in the external file. Values and files may be used in combination within an input line.
Hydraulic Conductivity
Choose One Porosity/Permeability ModelMatrix Only
Repeat for each Rock/Soil Zonation Domain,
X-Direction Hydraulic Conductivity,
hc: Units,(m/s),
Y-Direction Hydraulic Conductivity,
hc: Units,(m/s),
Z-Direction Hydraulic Conductivity,
hc: Units,(m/s),
IJK IndexingIf the Rock/Soil Name is "IJK Indexing," "JKI Indexing," or "KIJ Indexing" the value specified will be applied to all nodes in the domain. Alternately, any parameter value can be replaced with an external file using the following syntax in the place of the parameter value:
,file:,filename for parameter,
or for binary files:
,binary file:,filename for parameter,
Units shown in the input line will be applied to all parameters in the external file. Values and files may be used in combination within an input line.
Dual Continuum for Fractured Systems
InfoIf the key words 'dp,' 'dual porosity,' or 'fractured' appear in the rock/soil name specified in the Rock/Soil Zonation Card, this indicates a dual porosity medium and the reading of both matrix and fracture properties (e.g., Fracture and Matrix Porosity) is triggered.
Repeat for each Rock/Soil Zonation Domain,
X-Direction Matrix Hydraulic Conductivity,
hc: Units,(m/s),
Y-Direction Matrix Hydraulic Conductivity,
hc: Units,(m/s),
Z-Direction Matrix Hydraulic Conductivity,
hc: Units,(m/s),
X-Direction Fracture Hydraulic Conductivity,
hc: Units,(m/s),
Y-Direction Fracture Hydraulic Conductivity,
hc: Units,(m/s),
Z-Direction Fracture Hydraulic Conductivity,
hc: Units,(m/s),
IJK IndexingIf the Rock/Soil Name is "IJK Indexing," "JKI Indexing," or "KIJ Indexing" the value specified will be applied to all nodes in the domain. Alternately, any parameter value can be replaced with an external file using the following syntax in the place of the parameter value:
,file:,filename for parameter,
or for binary files:
,binary file:,filename for parameter,
Units shown in the input line will be applied to all parameters in the external file. Values and files may be used in combination within an input line.
Cylindrical Coordinate SystemIf a cylindrical coordinate system is specified, the the X-direction is the Radial direction and the Y-direction is the Azimuthal direction.
External FilesFile names must be all lower case. Files must contain text data unless specified as binary in which case they must contain binary data created with the same FORTRAN compiler used to compile STOMP. Files contain parameter values for every grid-cell, ordered according to the indexing scheme (i.e., IJK, JKI, or KIJ).