Grid Card Syntax (W)
Character string (e.g., van Genuchten, porosity, m^3/s, Roe Superbee)
Integer (no alpha characters, special characters, or punctuation) (e.g., 1, 32, 195634)
Real (decimal points and exponential notation allowed) (e.g., 0, 0.0, 1.e-12, 1.E+3, 2.345)
Keyword (exact formatting required) (e.g., file, ~Solution Control Card, binary file)
Card Title
~Grid Card
Choose one coordinate system option
Uniform Cartesian,
Number of X-Direction Grid Cells, Number of Y-Direction Grid Cells, Number of Z-Direction Grid Cells,
X-Direction Cell Size,Units(m),
Y-Direction Cell Size,Units(m),
Z-Direction Cell Size,Units(m),
Cartesian,
Number of X-Direction Grid Cells, Number of Y-Direction Grid Cells, Number of Z-Direction Grid Cells,
Choose one grid cell specification option
X-Direction Cell Surface Location,Units(m),...
Repeat for number of grid cells
...,X-Direction Cell Surface Location,Units(m),...
Y-Direction Cell Surface Location,Units(m),...
Repeat for number of grid cells
...,Y-Direction Cell Surface Location,Units(m),...
Z-Direction Cell Surface Location,Units(m),...
Repeat for number of grid cells
...,Z-Direction Cell Surface Location,Units(m),...
X-Direction Cell Surface Location,Units(m),Count@X-Direction Cell Size ,Units(m),...
Repeat until total number of grid cells is specified
...,Count@X-Direction Cell Size,Units(m),...
Y-Direction Cell Surface Location,Units(m),Count@Y-Direction Cell Size,Units(m),...
Repeat until total number of grid cells is specified
...,Count@Y-Direction Cell Size,Units(m),...
Z-Direction Cell Surface Location,Units(m),Count@Z-Direction Cell Size,Units(m),...
Repeat until total number of grid cells is specified
...,Count@Z-Direction Cell Size,Units(m),...
The first value must be the cell surface location, but after that, either the cell surface or the count@cell size may be specified.
For non-uniform grids, the location of the cell edges is specified, therefore, the number of cell surfaces specified will be one more than the number of grid cells in that direction.
Tilted Cartesian,
Number of X-Direction Grid Cells, Number of Y-Direction Grid Cells, Number of Z-Direction Grid Cells,
X-Z Plane Tilt Angle,Units(rad),
Y-Z Plane Tilt Angle,Units(rad),
Choose one grid cell specification option
X-Direction Cell Surface Location,Units(m),...
Repeat for number of grid cells
...,X-Direction Cell Surface Location,Units(m),...
Y-Direction Cell Surface Location,Units(m),...
Repeat for number of grid cells
...,Y-Direction Cell Surface Location,Units(m),...
Z-Direction Cell SurfaceLocation,Units(m),...
Repeat for number of grid cells
...,Z-Direction Cell Surface Location,Units(m),...
X-Direction Cell Surface ,Units(m),Count@X-Direction Cell Size,Units(m),...
Repeat until total number of grid cells is specified
...,Count@X-Direction Cell Size ,Units(m),...
Y-Direction Cell Surface,Units,Count@Y-Direction Cell Size,Units(m),
Repeat until total number of grid cells is specified
...,Count@Y-Direction Cell Size,Units(m),...
Z-Direction Cell Surface,Units(m),Count@Z-Direction Cell Size,Units(m),
Repeat until total number of grid cells is specified
...,Count@Z-Direction Cell Size,Units(m),...
The first value must be the cell surface location, but after that, either the cell surface or the count@cell size may be specified.
For non-uniform grids, the location of the cell edges is specified, therefore, the number of cell surfaces specified will be one more than the number of grid cells in that direction.
Uniform Cylindrical,
Number of Radial Direction Grid Cells, Number of Azimuthal Direction Grid Cells, Number of Z-Direction Grid Cells,
Radial Direction Cell Size,Units(m),
Azimuthal Direction Cell Size,Units(rad),
Z-Direction Cell Size,Units(m),
Cylindrical,
Number of Radial Direction Grid Cells, Number of Azimuthal Direction Grid Cells, Number of Z-Direction Grid Cells,
Choose one grid cell specification option
Radial Direction Cell Surface Location,Units(m),...
Repeat for number of grid cells
...,Radial Direction Cell Surface Location ,Units(m),...
Azimuthal Direction Cell Surface Location,Units(rad),...
Repeat for number of grid cells
...,Azimuthal Direction Cell Surface Location,Units(rad),...
Z-Direction Cell Surface Location,Units(m),...
Repeat for number of grid cells
...,Z-Direction Cell Surface Location,Units(m),...
Radial Direction Cell Surface ,Units(m),Count@Radial Direction Cell Size ,Units(m),...
Repeat until total number of grid cells is specified
...,Count@Radial Direction Cell Size ,Units(m),...
Azimuthal Direction Cell Surface,Units(rad),Count@Azimuthal Direction Cell Size,Units(rad),...
Repeat until total number of grid cells is specified
...,Count@Azimuthal Direction Cell Size ,Units(rad),...
Z-Direction Cell Surface,Units(m),Count@Z-Direction Cell Size,Units(m),...
Repeat until total number of grid cells is specified
...,Count@Z-Direction Cell Size ,Units(m),...
The first value must be the cell surface location, but after that, either the cell surface or the count@cell size may be specified.
For non-uniform grids, the location of the cell edges is specified, therefore, the number of cell surfaces specified will be one more than the number of grid cells in that direction.
Boundary Fitted,
Number of X-Direction Grid Cells, Number of Y-Direction Grid Cells, Number of Z-Direction Grid Cells,External File Name,
File names must be all lower case.
Number of cell surfaces in x-direction +1 Number of cell surfaces in y-direction +1 Number of cell surfaces in z-direction +1 list of x-direction vertices in order of increasing x list of y-direction vertices in order of increasing y list of z-direction vertices in order of increasing z
Formatting
Values are space delimited.
Generic Eclipse,
Number of X-Direction Grid Cells, Number of Y-Direction Grid Cells, Number of Z-Direction Grid Cells,
External File Name,Minimum Z-Direction Grid Spacing,Units(m),
File names must be all lower case.
Earthvision Sampled Input,
Number of X-Direction Grid Cells, Number of Y-Direction Grid Cells, Number of Z-Direction Grid Cells,
External File Name,Units(m),
File names must be all lower case.
Element and Vertices,
Number of X-Direction Grid Cells, Number of Y-Direction Grid Cells, Number of Z-Direction Grid Cells,
External Vertices File Name,Number of Vertices,
External Elements File Name,
File names must be all lower case.
Vertices File
Specify the location of vertices header line
Repeat for number of grid cells*8
vertex number x-location of vertex y-location of vertex z-location of vertex
Formatting
Values are space delimited.
Elements File
Specify which 8 vertices define each element
Repeat for number of grid cells element number vertex number 1 vertex number 2 vertex number 3 vertex number 4 vertex number 5 vertex number 6 vertex number 7 vertex number 8
Formatting
Values are space delimited.
The grid dimensions that are specified on the Grid Card refer to node surfaces; therefore, for grids with non-uniform spacing, for each grid direction the number of entries required is one plus the number of nodes. Node volumes are defined by their bounding surfaces. Cylindrical coordinate systems are restricted to azimuthal axes which are less than or equal to 360 degrees.
STOMP User Guide Home
- Simulation Title Card
- Solution Control Card
- Grid Card
- Inactive Nodes Card
- Rock Soil Zonation Card
- Mechanical Properties Card
- Hydraulic Properties Card
- Saturation Function Card
- Aqueous Relative Permeability Card
- Directional Aqueous Relative Permeability Cards
- Solute/Fluid Interaction Card
- Solute/Porous Media Interaction Card
- Initial Conditions Card
- Boundary Conditions Card
- Source Card
- Output Control Card
- Surface Flux Card
ECKEChem Input Cards