Plot File Species Variables (-R)
When the EckeChem Module is implemented for simulating reactive transport, the following variables can be specified in addition to the operational mode specific Plot File Output Variables.
| Reference Node Variable Name | SI Units |
|---|---|
species aqueous concentration * |
mol/L |
| species volumetric concentration * | mol/L |
| solid species aqueous concentration * (T) | mol/L |
| solid species volumetric concentration *(T) | mol/L |
| exchange species aqueous concentration *(T) | mol/L |
| exchange species volumetric concentration *(T) | mol/L |
species mineral area * |
m2 |
| species mineral rate * | mol/s |
| species integrated mass * | mol |
Bold indicates actual keyword(s) that must be specified in the Output Control Card.
*Indicates that the variable is included in the Qualified Code
(T) Indicates a total concentration on either an aqueous or volumetric basis, and can only be used with species listed in the Conservation Equation Card that are preceded by 'total_'.
Tip
It is strongly recommended that the pre-processor, toECKE, distributed with STOMP, be used to create the reactive transport cards used by the ECKEChem Module. This ensures that proper syntax is adhered to and that consistency among cards is maintained.
ECKEChem Input Cards
- Conservation Equations Card
- Equilibrium Equations Card
- Equilibrium Reactions Card
- Gas Species Card
- Kinetic Equations Card
- Kinetic Reactions Card
- Lithology Card
- Solid Species Card
- Species Link Card
- Aqueous Species Card
- Exchanged Species Card
- Plot File Species Variables
- Reference Node Species Variables