Hydraulic Properties Card (CO2E)
This card is used to assign values to the intrinsic permeability or hydraulic conductivity of each defined rock/soil type. Every rock/soil type defined on the Rock/Soil Zonation Card must be referenced. With the IJK Indexing option, node dependent parameters are entered via external files and node independent parameters are entered directly on the card. For fractured systems, if the dual porosity/permeability option is specified in the Rock/Soil Zonation Card, then hydraulic properties for both the matrix and fractures is specified.
- Hydraulic property models, model options and model parameters are described on the Card Options page.
Formatting instructions for specifying the hydraulic property models and parameters are provided on the Card Syntax page.
Examples of Hydraulic Properties Cards for STOMP-CO2e are provided on the Card Examples page.
STOMP User Guide Home
- Simulation Title Card
- Solution Control Card
- Grid Card
- Internal Boundary Surfaces
- Inactive Nodes Card
- Rock/Soil Zonation Card
- Mechanical Properties Card
- Hydraulic Properties Card
- Saturation Function Card
- Aqueous Phase Relative Permeability Card
- Gas Phase Relative Permeability Card
- Thermal Properties Card
- Salt Transport Card
- Initial Conditions Card
- Boundary ConditionsCard
- Coupled Well Card
- Source Card
- Output Control Card
- Surface Flux Card
ECKEChem Input Cards